20-04-2021

ETT USB Devices Driver



  1. ETT USB Devices Driver
  2. Ett Usb Devices Driver Download
  3. Ett Usb Devices Driver Windows 10

Considering this is an USB device, we also can try to update or reinstall the USB driver. If it is possible, we can try to connect with another USB port to have a check. Here is a link for reference of troubleshooting this issue. How to install the USB Driver for PS Audio USB 2.0 Devices This guide is for installing the USB 2.0 driver in Windows 10, 8, 7. Click this link to download the driver. Generally USB drivers are supplied as part of the Windows 10 Operating System, sometimes, your PC manufacturer will supply specific USB hub drivers. Open Device Manager (accessible by right clicking your Start Button) At the bottom of the hardware section list is the USB devices section, expand that.

Google is committed to advancing racial equity for Black communities. See how.

The Google USB Driver is required for Windows if you want to performadb debugging with Google devices. Windows drivers forall other devices are provided by the respective hardware manufacturer, as listed in theOEM USB Drivers document.

Driver USB V2.08.24. Analog Devices: สำหรับ MCU ของ Analog Devices เท่านั้น. ET-AVR ISP USB: ETT. Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager: Press the Windows and R key on your keyboard to open the Run command. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open. Locate and expand the Universal Serial Bus controllers section.

Note:If you're developing on Mac OS X or Linux, then you do not need to install a USBdriver. Instead seeUsing Hardware Devices.

You can download the Google USB Driver for Windows in one of two ways:

  • Or, get it from the Android SDK Manager as follows:
    1. In Android Studio, click Tools > SDK Manager.
    2. Click the SDK Tools tab.

    3. Select Google USB Driver and click OK.

      Figure 1. The SDK Manager with the Google USB Driver selected

    4. Proceed to install the package. When done, the driver files are downloaded into the android_sdkextrasgoogleusb_driver directory.

    Using the SDK Managerhelps you keep the driver up to date by notifying you when your current driveris out of date.

For installation information, readInstall a USB Driver.

Download the Google USB driver

Before downloading, you must agree to the following terms and conditions.

Terms and Conditions

This is the Android Software Development Kit License Agreement

1. Introduction

1.1 The Android Software Development Kit (referred to in the License Agreement as the 'SDK' and specifically including the Android system files, packaged APIs, and Google APIs add-ons) is licensed to you subject to the terms of the License Agreement. The License Agreement forms a legally binding contract between you and Google in relation to your use of the SDK.1.2 'Android' means the Android software stack for devices, as made available under the Android Open Source Project, which is located at the following URL: https://source.android.com/, as updated from time to time.1.3 A 'compatible implementation' means any Android device that (i) complies with the Android Compatibility Definition document, which can be found at the Android compatibility website (https://source.android.com/compatibility) and which may be updated from time to time; and (ii) successfully passes the Android Compatibility Test Suite (CTS).1.4 'Google' means Google LLC, organized under the laws of the State of Delaware, USA, and operating under the laws of the USA with principal place of business at 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA.

2. Accepting this License Agreement

2.1 In order to use the SDK, you must first agree to the License Agreement. You may not use the SDK if you do not accept the License Agreement.2.2 By clicking to accept and/or using this SDK, you hereby agree to the terms of the License Agreement.2.3 You may not use the SDK and may not accept the License Agreement if you are a person barred from receiving the SDK under the laws of the United States or other countries, including the country in which you are resident or from which you use the SDK.2.4 If you are agreeing to be bound by the License Agreement on behalf of your employer or other entity, you represent and warrant that you have full legal authority to bind your employer or such entity to the License Agreement. If you do not have the requisite authority, you may not accept the License Agreement or use the SDK on behalf of your employer or other entity.

3. SDK License from Google

3.1 Subject to the terms of the License Agreement, Google grants you a limited, worldwide, royalty-free, non-assignable, non-exclusive, and non-sublicensable license to use the SDK solely to develop applications for compatible implementations of Android.3.2 You may not use this SDK to develop applications for other platforms (including non-compatible implementations of Android) or to develop another SDK. You are of course free to develop applications for other platforms, including non-compatible implementations of Android, provided that this SDK is not used for that purpose.3.3 You agree that Google or third parties own all legal right, title and interest in and to the SDK, including any Intellectual Property Rights that subsist in the SDK. 'Intellectual Property Rights' means any and all rights under patent law, copyright law, trade secret law, trademark law, and any and all other proprietary rights. Google reserves all rights not expressly granted to you.3.4 You may not use the SDK for any purpose not expressly permitted by the License Agreement. Except to the extent required by applicable third party licenses, you may not copy (except for backup purposes), modify, adapt, redistribute, decompile, reverse engineer, disassemble, or create derivative works of the SDK or any part of the SDK.3.5 Use, reproduction and distribution of components of the SDK licensed under an open source software license are governed solely by the terms of that open source software license and not the License Agreement.3.6 You agree that the form and nature of the SDK that Google provides may change without prior notice to you and that future versions of the SDK may be incompatible with applications developed on previous versions of the SDK. You agree that Google may stop (permanently or temporarily) providing the SDK (or any features within the SDK) to you or to users generally at Google's sole discretion, without prior notice to you.3.7 Nothing in the License Agreement gives you a right to use any of Google's trade names, trademarks, service marks, logos, domain names, or other distinctive brand features.3.8 You agree that you will not remove, obscure, or alter any proprietary rights notices (including copyright and trademark notices) that may be affixed to or contained within the SDK.

4. Use of the SDK by You

4.1 Google agrees that it obtains no right, title or interest from you (or your licensors) under the License Agreement in or to any software applications that you develop using the SDK, including any intellectual property rights that subsist in those applications.4.2 You agree to use the SDK and write applications only for purposes that are permitted by (a) the License Agreement and (b) any applicable law, regulation or generally accepted practices or guidelines in the relevant jurisdictions (including any laws regarding the export of data or software to and from the United States or other relevant countries).4.3 You agree that if you use the SDK to develop applications for general public users, you will protect the privacy and legal rights of those users. If the users provide you with user names, passwords, or other login information or personal information, you must make the users aware that the information will be available to your application, and you must provide legally adequate privacy notice and protection for those users. If your application stores personal or sensitive information provided by users, it must do so securely. If the user provides your application with Google Account information, your application may only use that information to access the user's Google Account when, and for the limited purposes for which, the user has given you permission to do so.4.4 You agree that you will not engage in any activity with the SDK, including the development or distribution of an application, that interferes with, disrupts, damages, or accesses in an unauthorized manner the servers, networks, or other properties or services of any third party including, but not limited to, Google or any mobile communications carrier.4.5 You agree that you are solely responsible for (and that Google has no responsibility to you or to any third party for) any data, content, or resources that you create, transmit or display through Android and/or applications for Android, and for the consequences of your actions (including any loss or damage which Google may suffer) by doing so.4.6 You agree that you are solely responsible for (and that Google has no responsibility to you or to any third party for) any breach of your obligations under the License Agreement, any applicable third party contract or Terms of Service, or any applicable law or regulation, and for the consequences (including any loss or damage which Google or any third party may suffer) of any such breach.

5. Your Developer Credentials

5.1 You agree that you are responsible for maintaining the confidentiality of any developer credentials that may be issued to you by Google or which you may choose yourself and that you will be solely responsible for all applications that are developed under your developer credentials.

6. Privacy and Information

6.1 In order to continually innovate and improve the SDK, Google may collect certain usage statistics from the software including but not limited to a unique identifier, associated IP address, version number of the software, and information on which tools and/or services in the SDK are being used and how they are being used. Before any of this information is collected, the SDK will notify you and seek your consent. If you withhold consent, the information will not be collected.6.2 The data collected is examined in the aggregate to improve the SDK and is maintained in accordance with Google's Privacy Policy.6.3 Anonymized and aggregated sets of the data may be shared with Google partners to improve the SDK.Ett usb devices driver windows 10

7. Third Party Applications

7.1 If you use the SDK to run applications developed by a third party or that access data, content or resources provided by a third party, you agree that Google is not responsible for those applications, data, content, or resources. You understand that all data, content or resources which you may access through such third party applications are the sole responsibility of the person from which they originated and that Google is not liable for any loss or damage that you may experience as a result of the use or access of any of those third party applications, data, content, or resources.7.2 You should be aware the data, content, and resources presented to you through such a third party application may be protected by intellectual property rights which are owned by the providers (or by other persons or companies on their behalf). You may not modify, rent, lease, loan, sell, distribute or create derivative works based on these data, content, or resources (either in whole or in part) unless you have been specifically given permission to do so by the relevant owners.7.3 You acknowledge that your use of such third party applications, data, content, or resources may be subject to separate terms between you and the relevant third party. In that case, the License Agreement does not affect your legal relationship with these third parties.

8. Using Android APIs

8.1 Google Data APIs8.1.1 If you use any API to retrieve data from Google, you acknowledge that the data may be protected by intellectual property rights which are owned by Google or those parties that provide the data (or by other persons or companies on their behalf). Your use of any such API may be subject to additional Terms of Service. You may not modify, rent, lease, loan, sell, distribute or create derivative works based on this data (either in whole or in part) unless allowed by the relevant Terms of Service.8.1.2 If you use any API to retrieve a user's data from Google, you acknowledge and agree that you shall retrieve data only with the user's explicit consent and only when, and for the limited purposes for which, the user has given you permission to do so. If you use the Android Recognition Service API, documented at the following URL: https://developer.android.com/reference/android/speech/RecognitionService, as updated from time to time, you acknowledge that the use of the API is subject to the Data Processing Addendum for Products where Google is a Data Processor, which is located at the following URL: https://privacy.google.com/businesses/gdprprocessorterms/, as updated from time to time. By clicking to accept, you hereby agree to the terms of the Data Processing Addendum for Products where Google is a Data Processor.

9. Terminating this License Agreement

9.1 The License Agreement will continue to apply until terminated by either you or Google as set out below.9.2 If you want to terminate the License Agreement, you may do so by ceasing your use of the SDK and any relevant developer credentials.9.3 Google may at any time, terminate the License Agreement with you if:(A) you have breached any provision of the License Agreement; or(B) Google is required to do so by law; or(C) the partner with whom Google offered certain parts of SDK (such as APIs) to you has terminated its relationship with Google or ceased to offer certain parts of the SDK to you; or(D) Google decides to no longer provide the SDK or certain parts of the SDK to users in the country in which you are resident or from which you use the service, or the provision of the SDK or certain SDK services to you by Google is, in Google's sole discretion, no longer commercially viable.9.4 When the License Agreement comes to an end, all of the legal rights, obligations and liabilities that you and Google have benefited from, been subject to (or which have accrued over time whilst the License Agreement has been in force) or which are expressed to continue indefinitely, shall be unaffected by this cessation, and the provisions of paragraph 14.7 shall continue to apply to such rights, obligations and liabilities indefinitely.

10. DISCLAIMER OF WARRANTIES

10.1 YOU EXPRESSLY UNDERSTAND AND AGREE THAT YOUR USE OF THE SDK IS AT YOUR SOLE RISK AND THAT THE SDK IS PROVIDED 'AS IS' AND 'AS AVAILABLE' WITHOUT WARRANTY OF ANY KIND FROM GOOGLE.10.2 YOUR USE OF THE SDK AND ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE SDK IS AT YOUR OWN DISCRETION AND RISK AND YOU ARE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR OTHER DEVICE OR LOSS OF DATA THAT RESULTS FROM SUCH USE.10.3 GOOGLE FURTHER EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

11. LIMITATION OF LIABILITY

11.1 YOU EXPRESSLY UNDERSTAND AND AGREE THAT GOOGLE, ITS SUBSIDIARIES AND AFFILIATES, AND ITS LICENSORS SHALL NOT BE LIABLE TO YOU UNDER ANY THEORY OF LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES THAT MAY BE INCURRED BY YOU, INCLUDING ANY LOSS OF DATA, WHETHER OR NOT GOOGLE OR ITS REPRESENTATIVES HAVE BEEN ADVISED OF OR SHOULD HAVE BEEN AWARE OF THE POSSIBILITY OF ANY SUCH LOSSES ARISING.

12. Indemnification

12.1 To the maximum extent permitted by law, you agree to defend, indemnify and hold harmless Google, its affiliates and their respective directors, officers, employees and agents from and against any and all claims, actions, suits or proceedings, as well as any and all losses, liabilities, damages, costs and expenses (including reasonable attorneys fees) arising out of or accruing from (a) your use of the SDK, (b) any application you develop on the SDK that infringes any copyright, trademark, trade secret, trade dress, patent or other intellectual property right of any person or defames any person or violates their rights of publicity or privacy, and (c) any non-compliance by you with the License Agreement.

13. Changes to the License Agreement

13.1 Google may make changes to the License Agreement as it distributes new versions of the SDK. When these changes are made, Google will make a new version of the License Agreement available on the website where the SDK is made available.

14. General Legal Terms

14.1 The License Agreement constitutes the whole legal agreement between you and Google and governs your use of the SDK (excluding any services which Google may provide to you under a separate written agreement), and completely replaces any prior agreements between you and Google in relation to the SDK.14.2 You agree that if Google does not exercise or enforce any legal right or remedy which is contained in the License Agreement (or which Google has the benefit of under any applicable law), this will not be taken to be a formal waiver of Google's rights and that those rights or remedies will still be available to Google.14.3 If any court of law, having the jurisdiction to decide on this matter, rules that any provision of the License Agreement is invalid, then that provision will be removed from the License Agreement without affecting the rest of the License Agreement. The remaining provisions of the License Agreement will continue to be valid and enforceable.14.4 You acknowledge and agree that each member of the group of companies of which Google is the parent shall be third party beneficiaries to the License Agreement and that such other companies shall be entitled to directly enforce, and rely upon, any provision of the License Agreement that confers a benefit on (or rights in favor of) them. Other than this, no other person or company shall be third party beneficiaries to the License Agreement.14.5 EXPORT RESTRICTIONS. THE SDK IS SUBJECT TO UNITED STATES EXPORT LAWS AND REGULATIONS. YOU MUST COMPLY WITH ALL DOMESTIC AND INTERNATIONAL EXPORT LAWS AND REGULATIONS THAT APPLY TO THE SDK. THESE LAWS INCLUDE RESTRICTIONS ON DESTINATIONS, END USERS AND END USE.14.6 The rights granted in the License Agreement may not be assigned or transferred by either you or Google without the prior written approval of the other party. Neither you nor Google shall be permitted to delegate their responsibilities or obligations under the License Agreement without the prior written approval of the other party.14.7 The License Agreement, and your relationship with Google under the License Agreement, shall be governed by the laws of the State of California without regard to its conflict of laws provisions. You and Google agree to submit to the exclusive jurisdiction of the courts located within the county of Santa Clara, California to resolve any legal matter arising from the License Agreement. Notwithstanding this, you agree that Google shall still be allowed to apply for injunctive remedies (or an equivalent type of urgent legal relief) in any jurisdiction.January 16, 2019

latest_usb_driver_windows.zip

General Test Tools

USB Power Delivery /USB Type-C Test Tools

USB4TM Test Tools

ETT USB Devices Driver

xHCI-based Test Tools

EHCI-based Test Tools

Electrical Test Tools and Fixtures

Products Used for Testing

Please review the USB-IF Compliance Updates webpage frequently for the latest information regarding the USB-IF Compliance Program. The updates may contain information on test requirements and/or test procedures. Subscribe to the USB-IF Compliance Update Mailing List by emailing admin@usb.org.

General Test Tools

USB Vendor Info File Generator

USB Vendor Info File Generator Version 3.1.0.2 (Updated October 9, 2020 ) can be downloaded here.

USB Power Delivery/USB Type-C Test Tools

QuadDraw and QuadraView

QuadDraw is the official software for the QuadraMAX hardware, and QuadraView is the official software for viewing the results generated by a QuadraMAX.

  • The Non-PPS Test Manual : QuadraMAX Manual
  • The PPS Test Manual: QuadraMAX PPS Test Manual
Driver

NOTE: The QuadDraw tool is supported on Windows 7 and above only.
NOTE: QuadDraw requires .NET 4.5

USB4TM Test Tools

USB4CV Tool

USB

This tool is used to test the Logical Layer, Protocol Layer, and Tunneling functionality of a USB4 Router. This tool takes control over the USB4 Connection Manager and renders all products connected to it unusable. USB4CV should not be installed on an oscilloscope or any system that uses USB as its only form of input from the user.


The USB4CV tool Ver. 0.9.2.0 (Updated January 15, 2021) is available below.

NOTE 1: In order to use USB4CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The USB4CV tool is supported on Windows 10 and above.

If you have questions please email techadmin@usb.org.

For vendors seeking version numbers to be used at upcoming workshops please visit the compliance updates page found here.

USB4 Electrical Test Tool (ETT)

This tool kit contains the Window-based ETT utility used to initiate test modes on a USB4 Router.


The USB4 ETT tool Ver. 0.9.7 is available below in a zip file. This includes both GUI and CLI version. See included documentation for instructions on how to run the tool.

If you have any questions, please contact techadmin@usb.org.

Wilder Controller

Visit www.wilder-tech.com for information about Wilder products.

USB4 Test Fixtures and Microcontroller

Contact Sales@wilder-tech.com for sales information.

Contact Support-USB@wilder-tech.com with any Wilder hardware or software support questions.

xHCI-based Test Tools

USB3CV Tool

USB3CV is used to test USB 2.0 devices and USB 3.2 devices. This tool is used to test a USB product's control messaging, descriptors and basic protocol when connected to an xHCI controller. This tool takes control over the USB host controller and renders all products connected to it unusable. USB3CV should not be installed on an oscilloscope or any system that uses USB as its only form of input from the user.

The USB3CV tool Ver. 2.1.16.1 (Updated January 25, 2021) is available below.

NOTE 1: In order to use USB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The USB3CV tool is supported on Windows 7 and above.

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.

View .pdf version of Company List here: https://www.usb.org/developers

If you have any questions, please contact usbcompliance@usb.org.

Driver


For vendors seeking version numbers to be used at upcoming workshops please visit the compliance updates page found here.

XHCICV Tool

This tool is used to test an xHCI controller for compliance to the xHCI Specification. This tool takes control over the USB host controller and renders all products connected to it unusable. Testing requires use of compliance devices, a device that supports LPM-L1, and samples of all speeds of devices supported by the xHCI controller being tested.

The XHCICV tool Ver. 2.2.5.0 (Updated January 13, 2021) is available below.

NOTE 1: In order to use XHCICV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The XHCICV tool is supported on Windows 7 and above.

If you have questions please email techadmin@usb.org.

HUB3CV Tool

This tool is used to test a USB Hubs control messaging, descriptors and basic protocol when connected to an xHCI controller. For the definition of a USB hub please refer to the USB base specifications. This tool takes control over the USB host controller and renders all products connected to the host controller unusable. USB3CV should not be installed an oscilloscope or any system that uses USB as its only form of input from the user.

The HUB3CV tool Ver. 1.3.15.1 (January 25, 2021) is available below.

NOTE 1: In order to use HUB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2 : The HUB3CV tool is supported on Windows 7 and above only.

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.

View .pdf version of Valid USB Vendor ID Numbers here: http://www.usb.org/developers

If you have any questions, please contact usbcompliance@usb.org.

DualHostUSB3CV Tool

Some system architectures use 2 xHCI hosts for a single connector. One host provides the 3.2 port, the other host provides the 2.0 port. DualHostUSB3CV is designed to test this architecture and contains a subset of tests from USB3CV and Hub3CV that need to be aware of both 2.0 and 3.2 speeds.


The DualHostUSB3CV tool Ver. 0.7.3.1 (January 25, 2020) is available below.

NOTE 1: In order to use DualHostUSB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2 : The DualHostUSB3CV tool is supported on Windows 7 and above only.

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.

View .pdf version of Valid USB Vendor ID Numbers here: http://www.usb.org/developers

If you have any questions, please contact usbcompliance@usb.org.

USB xHSETT

This tool kit contains the Window-based HSETT utility used to initiate test modes through an xHCI controller. xHSETT also enables electrical testing for Enhanced SuperSpeed products. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here.

The USBxHSETT tool Ver. 1.3.6.8 is available below

HSETT Documentation version 0.41 for EHCI and xHCI

NOTE 1: In order to use USBHSET, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The USBHSET tool works on Windows 7 and above only. Email admin@usb.org if you would like an old version of the tool that supports XP.

If you have any questions, please contact usbcompliance@usb.org.

EHCI-based Test Tools

USB20CV

USB20CV is the compliance test tool which evaluates High, Full and Low-speed USB devices for conformance to the USB Device Framework (Chapter 9), Hub device class (Chapter 11), HID class, and OTG specifications. Also included are mass storage class and USB video class specification tests. All USB peripherals and hubs are required to pass the Device Framework tests in order to gain certification. The other tests are mandatory for certification when supported. This tool takes control over the USB host controller and renders all products connected to it unusable. USB2CV should not be installed an oscilloscope or any system that uses USB as its only form of input from the user.

The USB20CV tool Ver. 1.5.13.1 is available below

NOTES

  • If you have installed a previous version of the USB 2.0 Command Verifier, you must uninstall it before installing the new version
  • The USB20CV tool is supported on Windows 7 and above only.
  • Please download the Company List and save as usb.if in the same directory as USB20CV.
  • Please do not install this tool on a machine that already has previous versions of USB20CV installed. This tool requires an Enhanced Host Controller Interface, EHCI. If testing Full or Low-speed devices, an intervening Hi-Speed USB Hub is required. USB20CV uses a special purpose driver for the Hi-Speed USB Host Controller. USB20CV automatically replaces the standard Microsoft EHCI host driver with its own test stack driver. When USB20CV exits, the original standard Microsoft EHCI host driver is restored. Stack switching has been extensively tested with Microsoft EHCI drivers only. Stack switching has not been tested with USB 2.0 host controller drivers provided by other vendors. Please read the Release Notes for details

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.

View .pdf version of Company List here: https://www.usb.org/developers

USBHSETT

This tool kit contains the Window-based HSETT utility used to initiate test modes on an EHCI host controller. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here. A USB Electrical Analysis Tool is available separately for download (see USBET below). The procedures for legacy testing can be found in the USB-IF Compliance Program area. This software provided courtesy of Intel Corporation.

The USBHSET tool Ver. 1.3.5.7 is available below.

HSET Documentation version 0.41 for EHCI and xHCI


NOTE: The USBHSET tool works on Windows 7 and above only. Email admin@usb.org if you would like an old version of the tool that supports XP.

Electrical Test Tools and Fixtures

SigTest Tool

SigTest is the official tool for SuperSpeed USB transmitter voltage, LFPS, and Signal Quality electrical compliance testing as well as for calibrating SuperSpeed receiver test solutions. SigTest is designed to be used with the SuperSpeed electrical test fixture available in the USB-IF eStore.

  • SigTest version 4.0.23.2 (January 3, 2018) is available at https://www.intel.com/content/www/us/en/design/technology/high-speed-io/tools.html and should be used for USB 3.1 Gen 2 products.
  • The SigTest tool Ver. 3.2.11.3 (April 6, 2017) is available at https://www.intel.com/content/www/us/en/design/technology/high-speed-io/tools.html and should be used for USB 3.1 Gen 1 and older. SigTest 3.2.11.3 has been updated to remove the pass/fail criteria for Rj on the 5G transmitter electrical test.

USB Electrical Analysis Tool 20

Ett Usb Devices Driver Download

USBET20 is a stand-alone electrical signal analysis tool for USB Compliance testing. USBET20 is the official compliance electrical analysis tool that performs pass/fail assessments on signal quality and inrush current data captured from an oscilloscope.

The USBET20 tool Ver. 2.10.00 (8MB, December 2020) is available below.
• USBET20 32-bit Windows

USBET20 accepts .tsv and .csv data files generated by USB-IF approved digital oscilloscopes and produces the familiar .html results files of the analysis.

NOTE 1: The only official analysis tool for certifying signal quality and inrush current is USBET20 published by the USB-IF. Some of the approved oscilloscope test solutions use proprietary software to assess signal quality and inrush current events. Please be sure to run captured signal quality and inrush current test data through USBET20 for an official assessment of the measurement.
NOTE 2: The USBHSET tool works on Windows 7 and above only.

USB HS Host SQ Test Fixture

Fixtures can be purchased directly from Allion at https://www.allion.com/fixture-usb-type-a-b/.

Fixtures can be purchased directly from Eurofins at http://testusb.com/shop.htm

Drivers

USB2.0 Type-C™ Electrical Test Fixtures

USB USB 2.0 Type-C™ Electrical Test Fixtures
Fixtures for testing the USB2.0 electrical compliance parameters for USB Type-C™ devices, hosts and hubs are available and exists of two fixtures:

1. USB2.0 Type-C™ plug test fixture (FS-HUCP)
2. USB2.0 Type-C™ receptacle test fixture (FS-HUCR)

Ett Usb Devices Driver Windows 10

Technical and purchase details can be found at http://testusb.com/TypeC20.html